Product Specifications

Physical Size
Length: 86 in (218 cm)
Width: 52 in (132 cm)
Height: 60 in (152 cm)
Approximate Weight with Fluid: 6,100 lbs. (2767 kg)

Electric Motor
Motor Output: 150 hp (112 kw)
Motor Type: High Efficiency TEFC electric motor
Full load amps @ 460vac: (60Hz) 180
Full load amps @ 230vac: (60Hz) 360

Intensifier
Type: Single piston, dual plunger, reciprocating
Number of Intensifiers: two
Rated Pressure: 60,000 psi (4,100 bar)
Intensification Ratio: 19:1
Flow Rate: 3.2 gpm (12.1 lpm)
Maximum Rated Orifice Size: .025 in (.64 mm)

Low-Pressure Water/Intensification Water
Type: Pretreated, <100 TDS, PH 6-8, Silica <15PPM
Supply Requirements: 2.9 gpm @ 20 psi (1.4 bar ) min. / 75°F (24°C) max.
Filtration: 10, 1, .45 Micron

Coolant Water
Maximum Temperature: 70°F (21°C)
Minimum: 0-10.0 gpm (0-37.9 lpm) @ 60 psi (4.1 bar)
Ability to Remove: 125,000 BTUs / Hour
Heat Exchanger: Shell and Tube (2)

Hydraulics
Reservoir Capacity: 75 gallons (209 liters)
Filtration: Full Flow 10 Micron

Environmental
Ambient Room Temperature: 50°-100°F (10°-37°C)
Relative Humidity: Non-condensing, Maximum 95% @ 100°F

 

The Jet Edge iP55-150 is a 150-horsepower intensifier pump rated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi (3,800 bar) with flow rates of 0 to 3.2 gallons (12.11 liters) per minute to a variety of cutting, surface preparation or cleaning tools.

The iP55-150 intensifier pump features a patented intensifier design combined with a certified attenuator, complying with ASME pressure vessel standards, to minimize pressure fluctuations. A 150-horsepower motor drives an axial piston, variable displacement, pressure-compensated type hydraulic pump. The high-efficiency, totally enclosed, fan cooled (TEFC) electric motor with wye-delta "soft start" ensures high reliability, long service life and minimal energy usage. A programmable logic controller (PLC) monitors and controls all machine functions, and automatically energizes relays to light the warning lamps in the event of potentially damaging conditions. The integrated water filter and booster system eliminates connections between other filtration systems.

Like all Jet Edge UHP intensifier pumps, the iP55-150 offers complete flexibility for waterjet cutting, cleaning or coating removal applications.

Construction
Heavy gauge sheet metal covers
Rugged all-steel welded framework
Hinged cover and removable access panels for convenient machine inspection and maintenance
Integral hydraulic reservoir
Sound insulated for quiet operation
NEMA 12/13 rated electrical enclosure

Finish
High solids/polyurethane

Standard Features
High efficiency TEFC motor
1500 or 1800 nominal motor speed (rpm)
Electronically shifted intensifiers
Wye-Delta soft start with disconnect
0.5 gallon (1.9 liter) high pressure attenuator with 1.45 micron filtration
Safety shutdown systems
Automatic safety pressure bleed-down valve
Thermostatically controlled cooling system
Programmable Logic Controller (PLC) for operation and safety monitoring
Axial piston, variable displacement, pressure-compensated hydraulic pump
Liquid-filled pressure gauges
UHP safety shielded tubing