Product Specifications


Performance Features

Continous Output Pressure: 36,000 psi (2,500 bar)
Motor Output, horsepower (kilowatt): 50 (37)
Flow Rate, gallons (liters) per minute: 1.9 (7.2)
Intensifier Configuration: Single
Intensifier Ratio: 12:1
Motor: Electric
Motor Starter: Wye-delta soft start with system disconnect
Motor Speed: 1,780 rpm
Maximum Rated Orifice Size, in (mm): .023 (.58)
Plunger Strokes Per Minute with Maximum Rated Orifice: 44
Full Load Amps @ 460 VAC (60Hz): 60
Full Load Amps @ 230 VAC (60Hz): 120
Full Load Amps @ 380 VAC (60Hz): 73
Electronic Controls: PLC
Hydraulic Circuit: Open Loop
Hydraulic Accessory Port: 1 Port with 3 gpm @ 1,500 psi
Water Filtration Cartridges: 1
Air Compressor: N/A
Skid Mount Frame: Standard
Dimensions
Length x Width x Height, in (cm): 80X37X52 (203X94X132)
Weight, lbs (kg): 3,020 (1,370)

 

The 50-horsepower iP3650 Jet Edge Mobile Intensifier Pump is capable of producing of 36,000 psi (2,800 bar) of ultra-high pressure (UHP) water for mobile cutting, surface preparation and cleaning applications.

The pump utilizes a pressure-compensated hydraulic system to drive plunger style intensifiers. The use of hydraulic fluid power provides smooth flowing UHP water resulting in long system life. Reliable and precise control of the electronically shifted intensifiers ensures superior performance standards with reduced operating costs. The pump is built on a skid-mounted frame with lifting eyes and forklift guides provided for increased mobility.

Construction
Heavy gauge sheet metal covers
Rugged all-steel welded framework
Hinged cover and removable access panels for convenient machine inspection and maintenance
Integral hydraulic reservoir
Sound insulated for quiet operation
NEMA 12/13 rated electrical enclosure

Finish
High solids/polyurethane

Standard Features
Continuous output pressures of up to 55,000 psi (3800 bar)
Electronically shifted intensifier(s)
Intensification ratio of 12:1 and 19:1
Safety shutdown systems
Automatic safety pressure bleed-down valve
Incoming water supply booster pump
1 micron water filtration
0.5 gallon (1.9 liter) high pressure attenuator
Programmable Logic Controller (PLC) for operation and safety monitoring
Dual pressure set points
Axial piston, variable displacement, pressure-compensated hydraulic pump
Liquid filled pressure gauge
UHP safety shielded tubing