Plasma Cutting Machines
Laser Cutting Machines
Welding Wire
Oxy Fuel Cutting Machines
Burny Controls
Atlantic Welding Wire
NTC Laser
Jet Edge Waterjet
Forster Welding Tables
Plasma Cutting Machines
Laser Cutting Machines
Downdraft Systems
Waterjet Cutting Machines
Plasma Cutting Machines
Precision Plasma Cutting
Laser Cutting
Welding Wire
welding rods
Oxy Fuel Cutting
       ©2007 LNX Solutions, LLC.    729 Meridian Street    Florence, Alabama 35630   Tel: 256-766-6021    Fax: 256-766-7066                                        Legal/Terms of Use
Home

Product Specifications


Performance Features

Continous Output Pressure: 36,000 psi (2,500 bar)
Motor Output, horsepower (kilowatt): 200 (149)
Flow Rate, gallons (liters) per minute: 6.1 (23.1)
Intensifier Configuration: Dual
Intensifier Ratio: 12:1
Motor: Electric
Motor Starter: Wye-delta soft start with system disconnect
Motor Speed: 1,780 rpm
Maximum Rated Orifice Size, in (mm): .040 (1.02)
Plunger Strokes Per Minute with Maximum Rated Orifice: 60
Full Load Amps @ 460 VAC (60Hz): 233
Full Load Amps @ 230 VAC (60Hz): 466
Full Load Amps @ 380 VAC (60Hz): 280
Electronic Controls: PLC
Hydraulic Circuit: Open Loop
Hydraulic Accessory Port: N/a
Water Filtration Cartridges: 4
Air Compressor: N/A
Skid Mount Frame: Standard
Dimensions
Length x Width x Height, in (cm): 92x57x61 (233x145x155)
Weight, lbs (kg): 6,200 (2,812)

iP36-200 Mobile Intensifier Pump


The 200-horsepower Jet Edge iP36200 Mobile Intensifier Pump is capable of adjusting output pressures from 5,000 to 36,000 psi (345 to 2,800 bar) and flow rates from 0 to 6.1 gallons (23.1 liters) per minute. The pump utilizes a pressure-compensated hydraulic system to drive plunger-style intensifiers. The use of hydraulic fluid power provides smooth flowing UHP water resulting in long system life. Reliable and precise control of the electronically shifted intensifiers ensures superior performance standards with reduced operating costs. The pump is built on a skid-mounted frame with lifting eyes and forklift guides provided for increased mobility.

Finish
High solids/polyurethane

Standard Features
Continuous output pressures of up to 55,000 psi (3800 bar)
Electronically shifted intensifier(s)
Intensification ratio of 12:1 and 19:1
Safety shutdown systems
Automatic safety pressure bleed-down valve
Incoming water supply booster pump
1 micron water filtration
0.5 gallon (1.9 liter) high pressure attenuator
Programmable Logic Controller (PLC) for operation and safety monitoring
Dual pressure set points
Axial piston, variable displacement, pressure-compensated hydraulic pump
Liquid filled pressure gauge
UHP safety shielded tubing